무엇을 도와드릴까요?
Designing a high-performance lens is only one part of an optical designer's job. The more elusive challenge is often in the tolerancing of that lens and in linking toleranced performance to as-built performance.
Join us for a 45 minute webinar presented by design and manufacturing experts Katie Schwertz and Shelby Ament to learn about the challenges and best practices of designing manufacturable lens assemblies. This webinar will provide background information on how a multi-element lens assembly is manufactured and assembled while providing insights on details that should be taken into consideration in the design and tolerancing stages. Taking extra time early on to consider these details can improve performance and yield, while reducing costs in the long run.
Throughout this webinar, participants will gain insight on the following topics:
Katie Schwertz - Senior Design Engineer, Edmund Optics
Katie Schwertz is a Senior Design Engineer in Edmund Optics' Tucson, Arizona, USA office. She is responsible for executing optical and optomechanical designs, tolerancing, analyses, and prototype evaluations for both internal development and external customers. Katie received her MS in Optical Sciences from University of Arizona, College of Optical Sciences and a BS in Optics from University of Rochester, Institute of Optics. She is a co-author of the SPIE Field Guide to Optomechanical Design and Analysis.
Shelby Ament
Shelby Ament was formerly an Optical Research Engineer at Edmund Optics in the Barrington, New Jersey, USA, office. She was responsible for developing new optical metrology and fabrication techniques to improve Edmund Optics’ manufacturing capabilities. Shelby received her PhD in Optical Science from the College of Optical Sciences at the University of Arizona and bachelor’s degree in Physics from DePauw University. Her dissertation involved design and fabrication of holograms to improve performance of solar energy systems.
혹은 지사별 연락처 확인
견적 도구
재고번호 입력 후 바로 시작
Copyright 2023, 에드몬드 옵틱스 코리아 사업자 등록번호: 110-81-74657 | 대표이사: 앙텍하우 | 통신판매업 신고번호: 제 2022-서울마포-0965호, 서울특별시 마포구 월드컵북로 21, 7층 (서교동 풍성빌딩)