
고-해상도 C-Mount coupler 시스템은 대부분의 현미경에 비디오 기능을 가능하게 합니다. Parfocal 조절은 간단한 twist로 scope의 eyepiece와 비디오 모니터로 둘 다 동시에 초점을 맞출 수 있게 합니다. 본체 바디/coupler는 relay 렌즈를 포함하여 현미경의 immediate 이미지가 카메라의 CCD chip으로 가는 것을 보호합니다. 여러가지 배율은 많은 CCD 포맷 (1/3", ½" 2/3", 1")에서 원하는 시야 달성이 가능합니다. 다른 bottom clamp는 coupler와 현미경 사이에 쉽고 다양한 수용을 허용합니다. 1.0X coupler는 디지털 카메라와 연관있는 고 해상도용으로 적합합니다.
참조: 원하는 카메라 포맷과 맞는 비디오 coupler를 첫번째 테이블에서 고르고 현미경과 맞는 적절한 bottom clamp를 두 번째 테이블에서 선택: 완벽한 시스템을 위해서는 두 가지 다 필요합니다. 문의 사항이 있으시면 문의 바랍니다.
이 테이블은 다양한 크기의 CCD chip 포맷과 다양한 배율 coupler사용 효과를 보여줍니다. 낮은 배율은 더 큰 시야를 줍니다. 낮은 배율은 큰 CCD 포맷 크기와 잘 사용되지 않습니다.
Note: Match video coupler from the first table with desired camera format, then match appropriate bottom clamp from the second table with your microscope; both parts are required to make a full system.
This table shows the effects of using various magnification couplers with different sensor formats. Lower magnification equals a larger field of view. Lower magnifications do not work well with larger sensor format sizes.
Stock No. | Coupler Magnification | 1/3" Format | ½" Format | 2/3" Format | 1" Format |
#58-376 | 0.50X Magnification | Widest FOV | Widest FOV | N/A | N/A |
#58-377 | 0.67X Magnification | Higher Mag. | Higher Mag. | Widest FOV | N/A |
#58-378 | 1.00X Magnification | Highest Mag. | Highest Mag. | Higher Mag. | Widest FOV |
Bottom Clamp Selections for Specific Microscope Models | |
A) Fits all LEICA scopes with 37mm ID photoports, as well as the LEICA DMR, DMLS, DMLB and DMIRB. | #58-379 |
B) Fits all 38mm ID photoports from LEICA, LEITZ, NIKON and WILD. Scopes do not include phototube, just a photoport or a removable phototube. | #58-380 |
C) Fits all NIKON scopes with phototubes (scopes with non removable/permanently affixed phototubes). | #58-381 |
D) Fits OLYMPUS scopes with U-SPT phototubes (standard trinocular phototubes on older scopes). | #58-382 |
E) Fits OLYMPUS BX and AX Provis series without U-SPT phototube. Scope does not include phototube, just a photoport or a removable phototube. | #58-383 |
F) Fits OLYMPUS and ZEISS scopes with standard 25mm outer diameter phototubes. | #58-384 |
G) Fits ZEISS: Axiolab, Axiotech, Axioplan-2 and Axiophot-2. If using standard trinocular photoport, fits AXIOVERT: 100, 135, 135M and 1M series. Also fits ZEISS: SV6, SV11, Stemi 2000-C and Stemi DRC. | #58-385 |
Note: The difference between a photoport and a phototube is that the photoport is the physical opening in a microscope into which a phototube is placed. Some phototubes are not removable.